Description

Damp Stop is a unique primer and protective coating that protects surfaces against rising damp and moisture ingress through walls and floors. Designed to protect surfaces such as concrete, masonry and general porous mineral surfaces to prevent the entry of dampness or moisture vapour into the built environment. Betta Damp Stop is one component requiring no mixing while offering the advantages of being solvent free and odourless. Also suitable as an anti-dust treatment for aged cement floors and dusty cement screeds.

Features

• Outstanding adhesion properties
• 1 component product, avoids mixing and rapid drying wastage common with 2 component epoxy based primers
• Suitable for internal, external underground and immersed applications
• Can be sand filled for high build repairs (use dry sand)
• Solvent free and odourless safe in confined areas
• Time-saving and user friendly

Uses

• Priming external floors before applying membranes
• Protecting timber flooring, carpet and vinyl against rising damp
• Sealing internal walls of cellars and basements against negative moisture vapour and dampness
• Sealing the internal face of underground walls against residual moisture
• Preparing and stabilising aged and dusty screeds for floor finishes
• Priming Hebel and aerated concrete surfaces
• Damproofing surfaces
• Protecting surfaces against negative hydrostatic pressure

Coverage and Usage

• General coverage as a vapour barrier primer and surface enhancer is 1 Litre/6–8 m²
• Optimum coverage on walls or floors against negative pressure and moisture is 1 Litre/3–4 m²
• Repairing and stabilising dusty screeds and aged concrete, coverage is 1 Litre/6m². Fine sand can be mixed with Damp Stop resin at a ratio of 3 parts sand to 1 part resin used in this type of application. For areas greater than 1mm, apply by spatula. Do not exceed 3mm high
• Lightly stir product before using. Apply with a short nap roller or short bristle brush
• Allow 3–6 hours drying between coats
• Apply 2nd coat in opposite direction to preceding coat
• Allow a minimum of 24 hours drying before applying finish membrane coatings or adhesives

Additional information

Barcode: 9322519005064

Part Number: 11201